标题: [M451] CAN ISP [打印本页] 作者: admin 时间: 2023-10-19 09:55 标题: [M451] CAN ISP
Application: This example code uses M451 CAN interface to upgrade firmware for APROM.
BSP Version: M451 Series BSP CMSIS V3.01.001
Hardware: NuMaker-PFM-M453
The C_CAN consists of the CAN Core, Message RAM, Message Handler, Control Registers and Module Interface. The CAN Core performs communication according to the CAN protocol version 2.0 part A and B. The bit rate can be programmed to values up to 1 MBit/s. For the connection to the physical layer, additional transceiver hardware is required.
This example code uses M451 CAN interface to upgrade firmware on the NuMaker-PFM-M453 board.