牛卧堂MCU技术交流

标题: [M460] Converting 4 CAN FD Messages to SLCAN by VCOM [打印本页]

作者: admin 时间: 7 天前
标题: [M460] Converting 4 CAN FD Messages to SLCAN by VCOM

Application: This example code converts 4 CAN FD messages of the M460 series microcontroller (MCU) into SLCAN protocol through the VCOM interface and sends them to the computer.
BSP Version: M460_Series_BSP_CMSIS_V3.00.002
Hardware: 3-In-1 Analyzer Tool

The CAN FD messages are stored in the microcontroller (MCU) with binary format, which makes it difficult to observe and operate the data on the CAN FD bus. This example converts CAN FD messages into ASCII code with SLCAN protocol through the virtual serial port VCOM to communicate with the debugging assistant on the PC.

You can download the sample code at https://www.nuvoton.com/resource-download.jsp?tp_GUID=EC012024102301492124

欢迎光临牛卧堂MCU技术交流 (http://www.nuvoton-mcu.com/)