找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M480] UART Wake Up and Compensation

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-9-23 09:45:15 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式

  • Application: This sample code uses the UART to wake up the M480 from power down mode and perform frequency compensation.
  • BSP Version: M480 Series BSP CMSIS V3.04.000
  • Hardware: NuMaker-PFM-M487 Ver 3.0
In this example code, the M480 will enter the power down mode. When the received UART data reaches the threshold, it will wake up the M480. Since the UART clock source needs to
be set to LXT in power down mode, UART baud rate compensation is used to achieve a more accurate frequency. Set the register WKRFRTEN (UART_WKCTL[2]) to enable the UART
wake-up function.

After entering the power down mode, when the data received in the RX FIFO reaches the threshold setting RFITL (UART_FIFO[7:4]), the receive data flag RFRTWKF (UART_WKSTS[2]) is set.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0313102638
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU