找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[NUC131] Using CAN to Adjusting Baud Rate Automatically

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-1-13 14:12:02 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This sample code receives data on the CAN bus by periodically changing the baud rate of NUC131 CAN to match the baud rate of the CAN bus.
  • BSP Version: NUC131 Series BSP CMSIS V3.00.005
  • Hardware: NuTiny-EVB-NUC131-LQFP64 V1.0
This sample code contains two projects, "CAN_TX_RX" and "CAN_Auto_Adjust_BPS". The "CAN_TX_RX" is a CAN sending and receiving demo, which is written to facilitate testing the function of "CAN_Auto_Adjust_BPS" demo.

The "CAN_Auto_Adjust_BPS" demo receives data on the CAN bus by periodically changing the baud rate of NUC131 CAN until it can normally receive data on the CAN bus, so as to match the baud rate of the CAN bus. After matching the baud rate of the CAN bus, packets will be periodically sent to the CAN bus. This demo can detect whether the baud rate range is 50 Kbps~1 Mbps, and step is 50 Kbps.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0908174604
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU