找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[ML56] Using Touch Slider to Control ARGB LED

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-1-17 15:02:37 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This sample code uses touch slider to control ARGB LED effect and uses SPI to simulate ARGB LED timing sequence on ML56 series.
  • BSP Version: ML51 Series BSP V2.00.001
  • Hardware: ML56 Demo Board Ver1.0
This sample code uses touch slider to control ARGB to do LED dimming and uses SPI to simulate ARGB LED timing sequence to achieve intuitive brightness control.

The ML56 demo board is a sensing board with a slider and a wheel. All of the sensors on this board are capacitive touch key sensing. The 6-element slider is connected to the following I/O: TK2(P29), TK3(P28), TK4(P27), TK5(P26), TK6(P25) and TK7(P24). When the finger touches the copper pad on the PCB, the current position can be reported by detecting the measurement of the capacitance changes.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0909094711
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU