找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M480] Use External Signal as HXT Clock Source

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-3-4 11:40:48 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This sample code uses the external signal as the HXT clock source and is divided and output to the CLKO pin.
  • BSP Version: M480 Series BSP CMSIS V3.04.000
  • Hardware: NuMaker-PFM-M487 Ver 3.0
In this example program, the input square wave to XT1_IN (PF.3) is used as the clock source of HXT, and after frequency division, it is output to CLKO (PC.13) for use by other peripheral components to synchronize the frequency between different components. At this time, XT1_OUT can be used as GPIO.

To enable this function, the CFGXT1 (CONFIG0[27]) of the configuration register must be set.

You can use the KEIL development environment to make this setting. The process is Project → Options for Target → Utilities → Settings → Configure, and check Work as GPIO.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1219135320
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU