找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[N76E003] Use UART for RS485 Communication

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-5-10 11:36:05 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This code is to use the UART of the MCU for RS485 communication.
  • BSP Version: N76E003 BSP Keil C51 v1.0.6
  • Hardware: NuTiny-SDK-N76E003 v2.1
Typical serial communication standards are RS232 and RS485, RS232 is full-duplex point-topoint communication, and RS485 is half-duplex communication (2-wire system), which can be networked from point to point, and RS485 is the voltage across the cable. The difference is used to indicate the transfer signal, which is quite different from the RS232 electrical characteristics. RS485 only specifies the electrical characteristics of the receiver and transmitter, and does not specify or recommend any data protocol.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0107140336
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏1 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU