找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M480] Use EADC to Capture DAC Signal

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-5-31 15:21:55 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This sample code uses EADC to capture the sine wave produced by the DAC.
  • BSP Version: M480 Series BSP CMSIS V3.04.000
  • Hardware: NuMaker-PFM-M487 Ver 3.0
In the example code, the software triggers the DAC to output a sine wave, and after the DAC output is stable, the software triggers the EADC to read its value. The sine wave consists of 64 levels. The pin used by the DAC is PB.13, and the pin used by the EADC is PB.0. The user must connect the two pins.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0626172618
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU