找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[Nano112] Use ACMP Slope to Measure PT1000

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-7-12 09:56:15 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
Application: This sample code uses the ACMP slope of Nano112 to measure the temperature of PT1000.
BSP Version: Nano102/112 Series BSP CMSIS v3.03.000
Hardware: NuTiny-SDK-Nano112V
The Single Slop ADC mode is an analog-to-digital conversion technique to measure unknown resistance and can be implemented with a comparator rather than a standalone
ADC module. The technique is using known and unknown resistor to discharge a capacitor. While the capacitor is discharged, the number of clock cycles counted by timer indicates
resistance ratio. Larger counting number indicates Larger resistance value. The unknown resistance can be calculated based on the discharge time and known resistance.

Only the comparator ACMP0 has Single Slope ADC mode which can implement a low cost but high resolution ADC function by using just a little additional external components.
The external components include a thermistor (e.g. PT1000), a reference resistor, and a capacitor.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1227193713

分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU