找回密码
 立即注册

QQ登录

只需一步,快速开始

开启左侧

[M480] Intelligent Power Station

[复制链接]
admin 发表于 2022-8-3 11:01:48 | 显示全部楼层 |阅读模式
Application: This example code uses M480 GPIO pins to control the relay and MOSFET switches and the Enhance ADC (EADC) with peripheral hardware circuits to measure the AC power currents and USB DC currents that passing thru the enabled AC and USB sockets.
BSP Version: M480 Series BSP CMSIS V3.03.001
Hardware: The M487 Smart Power board but it needs to work with NuMaker-M487D board and DALI master and slave boards.
This example code utilizes the M487 Smart Power board (Ver. 1.1) as the following figure that based on the main controller M487 MCU to control the relay and MOSFET switches by some GPIO pins of MCU and measure the AC power currents and USB DC currents by the Enhance ADC (EADC) of MCU with peripheral hardware circuits.

The Intelligent Power Station hardware consists of three boards, M487 Smart Power board, NuMaker-M487D board and DALI master/slave boards.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1130161919

牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU