找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[Mini51] PWM Trigger ADC and PWM Brake

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2023-6-25 10:39:57 | 只看该作者 回帖奖励 |正序浏览 |阅读模式

  • Application: This document describes how to use PWM trigger ADC and PWM brake function to stop PWM output.
  • BSP Version: Mini51DE Series BSP CMSIS V3.02.000
  • Hardware: NuTiny-EVB-Mini51_V2.1
This example code demonstrates two PWM functions. The first one is PWM triggers ADC and the second is PWM brake. PWM sends trigger request to ADC every 1 msec. After receiving the trigger request, ADC converts channel 0. ADC comparator 0 and 1 monitor the conversion result of ADC channel 0. When the result meets the condition of comparator 0 or 1, generates interrupt and prints related message. While the program executes, user can change the input voltage of pin INT1 to generate PWM brake. Then PWM stops output and ADC stops conversion.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1216134105
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU