找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[MS51] Drive 7-segment RGB LED

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2024-3-29 12:12:26 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: This example code uses MS51 32K series to drive RGB color 7-segment LED display.
  • BSP Version: MS51_Series_BSP_Keil_V1.00.006
  • Hardware: NuMaker-MS51PC V1.1 & PWM_ARGB_Control_Board V1.0
The classic 7-segment display typically features a single color configuration, and users only need to connect the positive terminal to a power source and various negative terminals to ground (GND) to manipulate the 7-segment display to exhibit different numerical digits.

The RGB color model is based on an additive process, where the primary colors of light — red, green, and blue are combined. When applied to a 7-segment LED display, RGB serves the dual purpose of illuminating the display and allowing precise control of the intensity levels of the three primary colors, each with 256 levels. This enables the creation of a staggering 16.7 million mixed colors.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0208280504
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU